Technical Absorbents
Techtextil Frankfurt

Free membership

Receive our weekly Newsletter
and set tailored daily news alerts.

Dyeing/​Finishing/​Printing

Ten thousand samples for 52 seasons

Not so long ago there were just two fashion seasons per year, but with the optimisation of supply chains, the time frames have been drastically changed.

30th May 2018

Innovation in Textiles
 |  Mönchengladbach

Clothing/​Footwear

Not so long ago there were just two fashion seasons per year, but with the advent of just in time manufacturing and the optimisation of supply chains, the timescale in the latest designs moving from the catwalks to the high street stores has been drastically shortened. Internet retailing has only accelerated expectations and with the advent of digitisation, the era of 52 micro-seasons per year is very much upon us.

Portugal’s ATB – Acabamentos Têxteis de Barcelos – a specialist in the supply of finished fabrics for Europe’s leading fast fashion retailers, was quick to recognise and respond to the emergence of fast fashion, using the latest technology by Monforts.

Mário and Ricardo Mano. © A. Monforts Textilmaschinen GmbH & Co. KG

The company is dyeing and finishing between 36-40 tonnes of fabric on a daily basis for key customers including Benetton, Esprit, Mango, and also Inditex – the textile logistics chain behind the hugely successful Zara brand, which is synonymous with the rise of fast fashion. These customers are, says company founder Mário Mano, extremely demanding in terms of quick turnaround.

“The deadline is always yesterday,” he jokes, “but the key to staying successful is in new technology investment and at the same time new fabric developments.”

Order from Inditex

At present, the company is keeping busy with a huge EUR 1.5 million order from Inditex for a total of around 600 tonnes of processed knitwear. ATB is one of the few companies with the capacity to deal with such an order. “Orders are usually for smaller quantities where the turnaround times can be as little as a week from the start of the knitting order to final delivery of the fully-finished fabrics, depending on the quantity of course,” said Mr Mano. “We’ve even received orders on a Thursday afternoon and had them with the customer by the following Monday morning.”

The Monforts Montex stenters at ATB are all 2.4 metres wide and use the latest control equipment to grant the highest possible process quality/reproducibility. © A. Monforts Textilmaschinen GmbH & Co. KG

Knitting is carried out at ATB’s sister company Etevimol, also in Barcelos, with 87 employees running some 160 knitting machines supplied by the leading European manufacturers. The ATB dyeing and finishing plant meanwhile has 187 employees and investment in the latest technology is ongoing. In addition to the knitted fabrics from Etevimol, it also finishes woven fabrics on a commission basis.

Installing Monforts technology

The company installed its first Monforts Montex stenter frame in 1990 and has subsequently ordered four more over the years. All are 2.4 metres wide and use heat recovery units for increased energy efficiency and also the latest control equipment, to grant the highest possible process quality/reproducibility.

“The Monforts machines are known for their efficiency and the fabric quality that can be achieved,” said Mário Mano. © A. Monforts Textilmaschinen GmbH & Co. KG

In addition, the ATB plant is equipped with three Monforts Dynair relaxation dryers, with the latest being installed in a new building, which is also presently used for warehousing but will eventually be used for additional manufacturing lines. The ATB finishing plant is operating over three shifts, for 24 hours a day, and often at weekends too, Mr Mano says.

ATB also holds some 10,000 fabric samples in stock, and its library is constantly growing. © A. Monforts Textilmaschinen GmbH & Co. KG

“The Monforts machines are known for their efficiency and the fabric quality that can be achieved. Reproducibility is also important and we’re very happy with their performance in this respect, because the fabrics we are processing vary from 100% cotton to those incorporating all of the difficult-to-process fibres. Operating in Portugal, we are not in the business for cheap products and in addition to our proximity to customers, guaranteed quality is the key to our business.”

Constantly growing

ATB also holds some 10,000 fabric samples in stock, and its library is constantly growing. “Our customers will ask for initial fabric samples and then very quickly need five metres of the fabric for prototyping, so we have to be very organised in this respect,” said Mario’s son Ricardo, who now works with his father managing the plant.

Customers like Inditex will very quickly need five metres of any given fabric for prototyping, requiring a highly-organised stock control system. © A. Monforts Textilmaschinen GmbH & Co. KG

“Following the ITMA 2015 textile machinery exhibition in Milan in 2015 – when the major advances in digital printing became apparent – we invested in three new digital printing machines which are housed in a special humidity and temperature-controlled plant at the site. It’s a new service for our customers, which they have appreciated, and is proving extremely helpful in the fabric sampling process.”

www.monforts.de

Latest Reports

Business intelligence for the fibre, textiles and apparel industries: technologies, innovations, markets, investments, trade policy, sourcing, strategy...

Find out more